Enable Show rotary enable on main window in the Settings window that appears, and click OK.Ĥ. Set the parameters for the rotary attachment as follows and click OK.ĥ. Import the pattern you want to engrave, set the size of the pattern, and set the engraving power and speed. You can click Frame to preview the position where the pattern is to be engraved and then set the laser head to the expected position.Īfter completing the settings, click Start.Ĭurrently, the firmware supports only some functions of the rotary attachment. Start From can be set only to Current Position. For example, you can change the position of the adjustable roller from 2 to 1 as follows: Setting the position of the adjustable roller Settings on the Move tab are not available. (1) Remove the screw from the adjustable roller.

(2) Pull up the support of the adjustable roller. Rotate the adjustable roller to the target position. (3) Put the support of the adjustable roller into the corresponding slot and press it into place. The side with a concave part faces away from the adjustable roller. (4) Tighten the removed screw to fix the support of the adjustable roller in the target position. Recommended settings for material parametersġ.

Inline reply outlook 2016